How to Set PTZ Rotation Limit

Series	Example	System Version
PTZ	DH-SDT4E425-4F-GB-A-PV1	V3.200.0000009.0.R

NB: The firmware version is based on the latest version when this document was created and may slightly differ from future versions, however, this will not affect any of the functionality.

After you set the PTZ Rotation Limit, the device can only move in a limited area.

1. Go to Setting - PTZ - PTZ Rotation Limit.

2. Set the up limit:

Adjust the device direction to the "Up Limit", and then click 'Setting'.

3.Set the down limit:

Adjust the device direction to the "Down Limit", and then click 'Setting'.

4. Click Enable to enable PTZ Rotation Limit.

(Edited by Yuchen Luo)